Z-Release

Zobrazit jako Mřížka Seznam
Seřadit podle
Ukázat na stránku

1/2" Adapter

The Half Inch Adapter adapts a Zacuto rod or zamerican arm from 15mm to either a ¼” 20 or ⅜” 16 male screw.
471,90 Kč s DPH

ZicroMount III

The ZicroMount III has a 1/4 20" screw (an extra screw can be added for an additional cost) to prevent monitors like the LH900 from rotating when locked on a Zamerican arm. Monitor claws are used for a single screw monitor to prevent it from rotating. By adding an optional camera pin, the ZicroMount III can be used as a mini Baseplate for small cameras, allowing for quick-release onto tripods and Zamerican arms for press conference schooting.
ZicroMount III (with optional camera pin and 1/4 20" screw)
2 894,32 Kč s DPH

Zound Hotshoe

The Zound Hotshoe is a quick release zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to the camera’s hotshoe. This kit is particularly designed to mount a sound device off the camera’s hotshoe but it can be used for other devices as well.
5 137,66 Kč s DPH

Z-mount II

The Z-Mount II connects two 15mm rods at a right angle with a quick release lever for each rod.
3 146,00 Kč s DPH

Z-Mount Zwivel

Z-Mount Zwivel je podobný produktu Z-Mount, ale navíc umožňuje měnit úhel mezi dvěma tyčemi o průměru 15mm
2 262,70 Kč s DPH

Zamerican V3 - Small 6 inch articulating arm

This is Zacuto small 6" articulating Zamerican Arm.
6 134,70 Kč s DPH

Zamerican Jr. Medium - 8 inch articulating arm with one ball pivot

Zamerican Jr. Small 5 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduced bulk.It is built with Z-Release, giving you built-in quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever. No more screwing and un-screwing and no more coming loose. Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Zamerican arms require a Z-Release (quick-release) mount on each end of the arm. Z-Release mounts include:ZicroMount, Z-Mount, Stand mount, (Zround Mount + Double Mount), (Zround Mount + Mini Mount), Zgrip, q-mount and 1/2 to 1/4 20" adapter.
5 505,50 Kč s DPH 3 114,54 Kč s DPH

Mini DSLR Baseplate

This smaller version of Zacuto DSLR Baseplate has a low profile and a port to attach a rod on the underside of the plate.
8 651,50 Kč s DPH

Připevnění s koulí do patičky blesku

Směrově nastavitelné připevnění je dokonalé pro Zacuto EVF. Rychloupínací mechanismus pevně drží kulové připevnění.
1 415,70 Kč s DPH

Zamerican, V3 Large

This is Zacuto large 12" articulating Zamerican Arm.
6 763,90 Kč s DPH

Q-Mount Lightweight

The Zacuto Q-Mount for 15mm lightweight spaced rods clamps onto 15mm rods to create a stable mount.
6 229,08 Kč s DPH

ZRod Lock Mount

The Zrod Lock Mount is a right angle rod adapter that connects a male rod end to your kit at a right angle.
2 044,90 Kč s DPH

Studio 15mm Minimount

The 15mm Studio MiniMount slides onto a set of 15mm studio spaced rods to act as a brace between rods.
5 977,40 Kč s DPH

MiniMount, no rods included

The MiniMount slides onto a set of 15mm lightweight spaced rods to act as a brace between rods. Shop the Zacuto Online Store!
5 505,50 Kč s DPH

1/4 20" screw for Zicro Mount II

1/4 20 Replacement Screw. !!
377,52 Kč s DPH

ZUD 1/4 20 M

A ZUD 1/4 20 Male is a short male rod primarily used to retrofit a Noga or Israeli arm.
1 541,54 Kč s DPH

Z-Rail T

The Z-Rail T attaches to cameras like the Sony F3, Panasonic AF100, or any other camera that has ¼ 20 taps along the top handle. Shop Now!
3 932,50 Kč s DPH 1 415,70 Kč s DPH

ZUD 3/8 16 M

'A ZUD 3/8 16'' male (retrofit any 3/8 16 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs convert your 1/4 20'' or 3/8 16'' screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mount, 15mm Z-locks, ZicroMount and all other Zacuto 15mm locking devices.
ZUD 3/8 16 M (retrofit any 3/8 16 female with Z-Release)'
1 304,38 Kč s DPH

Tri-Mount

The Tri-Mount attaches two quick release 15mm rod ports to the female end of a 15mm rod.
3 775,20 Kč s DPH

Ratcheting Lever Kit

Ratcheting Lever Kit - Set of four ratcheting levers to upgrade old versions.
1 195,48 Kč s DPH

ZUD 3/8 16

'A ZUD 3/8 16'' is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs convert your 1/4 20'' or 3/8 16'' screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mount, 15mm Z-locks, ZicroMount and all other Zacuto 15mm locking devices.
ZUD 3/8 16 (retrofit any 3/8 16 articulating arm with Z-Release)'
1 171,28 Kč s DPH

Zround Mount

Zround Mount adds a 15mm rod port for a rod or arm to a DoubleMount or Minimount.
3 775,20 Kč s DPH 1 101,10 Kč s DPH

Zamerican Jr. Small - 5 inch articulating arm with one ball pivot

Zamerican Jr. Medium 8 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduced bulk.It is built with Z-Release, giving you built-in quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever. No more screwing and un-screwing and no more coming loose. Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Zamerican arms require a Z-Release (quick-release) mount on each end of the arm. Z-Release mounts include:ZicroMount, Z-Mount, Stand mount, (Zround Mount + Double Mount), (Zround Mount + Mini Mount), Zgrip, q-mount and 1/2 to 1/4 20" adapter.
5 190,90 Kč s DPH 3 114,54 Kč s DPH

Z-Mount Zwivel 2

The Z-Mount Zwivel II combines Zacuto Zwivel technology with two quick release ratcheting levers to create a multipurpose mount.
2 988,70 Kč s DPH

Z-Rail Coldshoe

The Z-Rail Coldshoe mounts directly on to a Z-Rail Slide Mount or Z-Rail Cheese Stick.
931,70 Kč s DPH

Z-Rail Z-Mount

The Z-Rail Z- Mount clamps onto Zacuto standard Z-Rail and can be used to mount different accessories.
2 674,10 Kč s DPH

Zdapter - 15mm Z-Lock

The Z-Lock 15mm is specifically designed to attach a Wireless Plate Pro to a 15mm Rod.
1 863,40 Kč s DPH 532,40 Kč s DPH

Zano

The Zano clamps onto a tripod leg or handle enabling you to attach an articulating arm to mount an accessory.
2 528,90 Kč s DPH

Z-Rail Z-Lock

The Z-rail Z-lock puts a quick release port on the top of your RED Epic/Scarlet, Sony F3, and other cameras.
2 516,80 Kč s DPH

Zicro Coldshoe

Zicro Coldshoe umožňuje připevnit jakékoliv zařízení s bleskovou patičkou (hotshoe) na 15mm tyče a ramena.
2 359,50 Kč s DPH

Zotshoe

The Zotshoe connects to the hotshoe of a camera and converts it to a ¼ 20 screw hole to mount accessories.
2 170,74 Kč s DPH

Z-Rail Slide Mount

The Z-Rail Slide Mount clamps onto Zacuto standard Z-Rail and tightens with a quick release ratcheting lever.
2 170,74 Kč s DPH

Zaffer

The Zaffer clamps onto a table edge enabling you to attach a 15mm rod or articulating arm to mount an accessory.
2 874,96 Kč s DPH 1 868,72 Kč s DPH

1/2 inch to 3/8 16 Adapter

1/2 inch to 3/8 16 Adapter converts a Zacuto rod or Zamerican Articulating Arm to a 3/8 16 fixed screw.
597,74 Kč s DPH

5" Z-Rail

This Zrail accessory is compatible with the Black Magic Camera and others. It is particularly helpful when working with the Black Magic Camera and a Zacuto Axis EVF Mount.
1 730,30 Kč s DPH

Zicro Micro

The Zicro Micro is used to mount an accessory with a 1/4 20 screw hole to a 15mm rod or Zamerican Arm.
1 730,30 Kč s DPH

Z-Rail Zotshoe

Use this mount to attach Z-Rail accessories to your camera hotshoe.
1 730,30 Kč s DPH

Zdapter - Backplate

The Zdapter backplate allows you to mount Zacuto Z-locks in 15mm, 19mm, 5/8" in several different configurations.
1 815,00 Kč s DPH 567,19 Kč s DPH

Zicro mini

Zicro mini je podobné jako Zacuto Zicromount a Zacuto Zicromount III až na to, že je daleko tenčí. Zicro mini byl speciálně vytvořen pro Zacuto EVF.
1 573,00 Kč s DPH

ZUD 3/8 16 Male

A ZUD 3/8 16 Male is a short male rod primarily used to retrofit a Noga or Israeli arm.
1 541,54 Kč s DPH

Wireless Bracket

Use Zacuto Wireless Bracket with a Z-Lock to attach a Wireless Plate pro to a rod or C-Stand.
1 258,40 Kč s DPH 314,60 Kč s DPH

ZUD 1/4 20

A ZUD 1/4 20 is a short female rod primarily used to retrofit a Noga or Israeli arm. Shop the Zacuto Online Store Today
1 384,24 Kč s DPH

ZUD 3/8 16

A ZUD 3/8 16 is a short female rod primarily used to retrofit a Noga or Israeli arm.
1 384,24 Kč s DPH

1/2" Rod Cap

½ Rod cap – Can be used to under-sling Zacuto 15mm rods or Zamerican Arms (Large, Medium or Small) to prevent them from accidentally falling by screwing the 1/2 inch thread directly into Zamerican arm or rod ends.
377,52 Kč s DPH 283,14 Kč s DPH

Nano Clamp

The Manfrotto 386B Nano Clamp is a mini version of the highly popular Super Clamp.
931,70 Kč s DPH

3" Z-Rail

This 3" Z-rail accessory is compatible with the RED Epic/Scarlet, Sony F3 and FS700, and others.
880,88 Kč s DPH

Zdapter - 5/8" Z-Lock

A 5/8" Z-Lock is specifically designed to attach a Wireless Plate Pro to a 5/8" rod or spud.
2 359,50 Kč s DPH 786,50 Kč s DPH

Camera mounting pin for Zicro Mount II (optional)

Replacement camera mounting pin for Zicromount III or Mini Baseplate.
251,68 Kč s DPH

1/2 inch to 1/4 20 adapter

1/2 inch to 1/4 20 Adapter converts a Zacuto rod or Zamerican Articulating Arm to a 1/4 20 fixed screw.
597,74 Kč s DPH

Zangle

Zangle umožňuje pevné spojení dvou tyčí do pravého úhlu. Hodí se na vytvoření například držadla či klece.
1 258,40 Kč s DPH 440,44 Kč s DPH